loader image

Ocala Detailing

Side by Side Detailing

Built for the Mud, Cleaned for the Showroom

You don’t buy a side by side to keep it clean, but that doesn’t mean it shouldn’t look incredible when the fun’s over.
At Ocala Detailing, we specialize in restoring side by sides, ATVs, and UTVs to better than new condition after a weekend on the trails, hunting lease, or back roads. Whether you’ve been carving through Ocala National Forest or crawling through red clay, we’ll bring your ride back spotless and ready for the next adventure.
We come to you with all power, water, and professional detailing equipment needed to clean every inch safely and thoroughly.

Professional Detailing for All Off Road Rigs

Our process works for every make, model, and level of dirt. We handle:

Polaris RZR, Ranger, and General

Can Am Maverick, Defender, and Commander

Honda Pioneer and Talon

Yamaha Wolverine and Viking

Kawasaki Teryx and Mule

Custom builds and lifted rigs

No matter how bad the mud, we’ve seen worse, and we love the challenge.

Our Side by Side Detailing Services

Each detail includes a full body clean, protection, and inspection to help your rig last longer and perform better between rides.

Exterior Detailing and Protection

Heavy mud, sand, and clay removal

Full body hand wash with foam cannon pre soak

Wheel, tire, and suspension cleaning

Underbody degreasing

Plastic and trim restoration

Chrome and metal polishing

Spray wax or ceramic coating for UV protection

Your machine will shine like it never touched dirt, with protection that lasts for miles.

Interior and Cage Detailing

Seat and harness cleaning and conditioning

Dashboard and switch panel wipe down

Roll cage, doors, and roof panel cleaning

Console and cupholder detailing

Vent and floorboard cleaning

UV protectant applied to all surfaces

We leave no mud splatter or dust layer behind, guaranteed.

Add On Services

For riders who want maximum protection and lasting results, we offer:

Ceramic Coating:

Long term protection for plastics, paint, and metal surfaces

Oxidation Removal

Restores shine to weathered exteriors

Headlight and Light Bar Cleaning

Improves brightness and clarity

Undercarriage Protection

Helps prevent corrosion and buildup

Vinyl Wrap and Decal Safe Cleaning

Keeps your graphics looking sharp

Our Process: Detailer Tested, Trail Proven

We don’t just clean side by sides, we know them. Every step of our process is built for off road rigs that work hard and play harder.

1. Pre Inspection and Rinse

We start with a thorough inspection, then pressure rinse heavy mud from every angle.

2. Deep Clean and Degrease

Suspension arms, axles, and undercarriage are cleaned and degreased without harming seals or bearings.

3. Wash and Dry

We hand wash using premium off road safe soaps, then power dry with microfiber towels.

4. Interior and Plastics Detailing

We restore every surface, removing stains, scratches, and fading from sun or mud exposure.

5. Finishing and Protection

Wax, sealant, or ceramic protection is applied based on your preferences, and a final inspection ensures your rig looks its best.

Why Off Roaders Trust Ocala Detailing

We’re not afraid of a little dirt or a lot. Ocala Detailing was built for people who love their toys as much as they love the ride.

Why local riders keep coming back

Certified, insured, and mobile detailing professionals

Complete mobile setup with water and power provided

Safe for plastics, wraps, and powder coated finishes

Quick turnaround for weekend warriors and fleet owners

Trusted by off roaders across Ocala, Dunnellon, and Marion County

“I had mud packed into places I didn’t even know existed. They cleaned every inch. Unreal job.”

Cody W Ocala National Forest

“They brought our entire group’s side by sides back to showroom condition after a trail weekend. Worth every penny.”

Shane B Belleview

Clean Enough to Park in the Driveway Again

Your side by side might be built for the mud, but there’s nothing wrong with showing it off clean.
Let Ocala Detailing bring your off road machine back to perfection, from top to tires, cage to skid plate.
We handle the mud so you can get back to the adventure.

Frequently Asked Questions

How do I get red clay and mud stains off my Side-by-Side?

Ocala Detailing uses professional-grade mud release agents and pH-balanced cleaners to lift stubborn Florida red clay from UTV surfaces. We follow this with a deep-cleaning foam bath and agitation to ensure all grit is removed from the plastics and suspension without scratching the finish.

 

Is it safe to pressure wash a Side-by-Side engine?

Professional detailing is safer than DIY pressure washing. Ocala Detailing uses controlled, low-pressure steam and specialized degreasers to clean UTV engines. This method removes oily residue and caked-on mud while protecting sensitive electrical components, air intakes, and vent lines from water intrusion and damage.

 

Can Ocala Detailing remove scratches from UTV plastics?

While deep gouges from trail brush are permanent, we can significantly improve the look of UTV plastics using specialized polishing compounds. Our “plastic restoration” service removes light surface scratches and restores the deep, original color to faded fenders and body panels, increasing the vehicle’s resale value.

 

How do you clean UTV windshields without scratching them?

Most SxS windshields are made of polycarbonate or acrylic, which scratch easily with standard towels. Ocala Detailing uses ultra-soft microfibers and plastic-specific cleaners to safely remove mud and dust. We can also apply a rain-repellent coating to improve visibility during sudden Florida rain showers.

 

Does SxS detailing include the undercarriage and suspension?

Yes, a full detail includes a comprehensive cleaning of the undercarriage, A-arms, shocks, and wheel wells. Removing caked-on mud from these areas is critical for preventing rust and allowing for a proper mechanical inspection of your CV boots, bushings, and brake lines.

 

How do I prevent my UTV’s tires and trim from turning brown?

Tire “browning” or blooming is caused by UV exposure and cheap dressings. Ocala Detailing deep-cleans the rubber to remove old oxidation and applies a premium, water-based UV protectant. This leaves a deep black finish that doesn’t attract trail dust or sling off while driving.

 

What is the best way to prep a Side-by-Side for sale in Ocala?

A professional “Sales-Prep” detail from Ocala Detailing is the best way to maximize your asking price. We perform a top-to-bottom deep clean, including engine degreasing, plastic restoration, and metal polishing. A spotless machine signals to buyers that the vehicle was well-maintained and not abused on the trails.

Scroll to Top